I got a good deal on a set of CNC S2 heads. The heads came with 7.250 Crane pushrods. That sounds a little short to me. I was told that they have a flat .060 mill. I am using a factory 03 LS6 camshaft. My questions is what pushrod length should I use?


Anybody??

 

In a case such as yours it is imperative that you assemble the pieces and check pushrod length using an adjustable pushrod.

 

.060 is alot to be milled. 7.250 might be close, but you do need to check with an adjustable pushrod tool.