Push Rods
Thread Starter
Teching In
Joined: Dec 2014
Posts: 12
Likes: 0
From: Amarillo
Push Rods So my wife bought me some pushrods with the help from the guys a Texas Speed, they are the 7.400 chromoly pushrods.
My question is she didn't know anything about me running a .040 head gasket and the pushrods are on hold as of right now.
I will be doing a VRX6 cam with stock heads non-milled and all supporting mods including ls7 lifters.
Basically I was wanting to know if I can get by with the 7.400 or if I should change the order and get the pushrod checker and even change to the 11/32?
Any input or a quick answer would be appreciated.
My question is she didn't know anything about me running a .040 head gasket and the pushrods are on hold as of right now.
I will be doing a VRX6 cam with stock heads non-milled and all supporting mods including ls7 lifters.
Basically I was wanting to know if I can get by with the 7.400 or if I should change the order and get the pushrod checker and even change to the 11/32?
Any input or a quick answer would be appreciated.
Last edited by ScratchedZ28; Dec 29, 2014 at 09:49 PM. Reason: More info
