Need Procharged ls1 cam/valvetrain recommendations
Thread Starter
Staging Lane
Joined: Dec 2014
Posts: 80
Likes: 0
From: PA
Need Procharged ls1 cam/valvetrain recommendations Looking to get some suggestions on a cam/spring/pushrods/lifters for my Procharged ls1 build. I have read through the stickys and understand the basics, at this point I'm looking to get some solid advice and product suggestions that I can purchase.
Current motor status:
-Ls1 bored .005 over
-Forged rods/pistons
-Approx 9.6-9.7 CR
-procharger d1sc
-CNC ported 243 heads:
Intake flow @ 28
.100 - 71.5
.200 - 146.2
.300 - 213.3
.400 - 255.0
.500 - 296.3
.600 - 312.0
Standard oem ls2 valve set
-Trunion upgraded ls1 rockers
-ls6 intake
-ported ls1 throttle body
-80lb injectors
- 1 7/8 LT headers
I am looking for a fairly aggressive (yet still fun to drive) cam and supporting springs/locks/retainers/pushrods/lifters that is/are capable of turning up to 6500-6800 RPM with a decent (not obnoxious) idle lope. The goal for the car is to make about 700ish rwhp through a m6 trans and strange 60 rear.
Thanks in advance for any and all help!
Current motor status:
-Ls1 bored .005 over
-Forged rods/pistons
-Approx 9.6-9.7 CR
-procharger d1sc
-CNC ported 243 heads:
Intake flow @ 28
.100 - 71.5
.200 - 146.2
.300 - 213.3
.400 - 255.0
.500 - 296.3
.600 - 312.0
Standard oem ls2 valve set
-Trunion upgraded ls1 rockers
-ls6 intake
-ported ls1 throttle body
-80lb injectors
- 1 7/8 LT headers
I am looking for a fairly aggressive (yet still fun to drive) cam and supporting springs/locks/retainers/pushrods/lifters that is/are capable of turning up to 6500-6800 RPM with a decent (not obnoxious) idle lope. The goal for the car is to make about 700ish rwhp through a m6 trans and strange 60 rear.
Thanks in advance for any and all help!
Last edited by snapdude; Jul 20, 2015 at 08:45 AM.
Brute speed blower cam is a good tried and true off the shelf cam. Tooley racing, Tick performance, or Cam motion would also be worth a call to get their recommendation on their blower cams. A good dual valve spring is always a good idea with FI, Tooley or Ferrea get my vote.
Brute speed blower cam is a good tried and true off the shelf cam. Tooley racing, Tick performance, or Cam motion would also be worth a call to get their recommendation on their blower cams. A good dual valve spring is always a good idea with FI, Tooley or Ferrea get my vote.
Thanks! Here is a link to this cam. Bob
__________________
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
ATI ProCharger and Moser Sales 260 672-2076
PM's disabled, please e-mail me
E-mail: brutespeed@gmail.comob@brutespeed.com
https://brutespeed.com/ Link to website
