Anyone have measurement of side main cap stud?
Thread Starter
Launching!
Joined: Feb 2015
Posts: 203
Likes: 6
Anyone have measurement of side main cap stud? I bought an LQ4 for a steal of a deal a few weeks back. It was all disassembled but everything is there. I literally have a bucket of bolts, fasteners, nuts, and studs. I have the long main studs picked out but cannot identify the side bolts. Does anyone have some laying around that they could take a picture and mic the length? If not, what is the gm part number of a new set of studs? I want to compare the price to ARP studs since my build is nothing crazy.
Thanks everyone
Thanks everyone
On The Tree
Joined: Jun 2012
Posts: 122
Likes: 2
I bought an LQ4 for a steal of a deal a few weeks back. It was all disassembled but everything is there. I literally have a bucket of bolts, fasteners, nuts, and studs. I have the long main studs picked out but cannot identify the side bolts. Does anyone have some laying around that they could take a picture and mic the length? If not, what is the gm part number of a new set of studs? I want to compare the price to ARP studs since my build is nothing crazy.
Thanks everyone
Thanks everyone
hope this helps
peace Thread Starter
Launching!
Joined: Feb 2015
Posts: 203
Likes: 6
On The Tree
Joined: Jun 2012
Posts: 122
Likes: 2
Just measured most all the 10mm bolts..
Side Main Cap: 1.30in or ARP 1.28in
Timing gear thrust plate: 1.17in
Timing gear: 1.29in
Top head bolts: 2.12in
ALL other 10mm where: 1.51 - 1.52in
Except the 4 lifter tray bolts which has a lip under the head ..
Nor did i measure the exhaust manifold bolts..
A Digital Caliper was used, measuring end to end.
Hope this helps ya peace
Side Main Cap: 1.30in or ARP 1.28in
Timing gear thrust plate: 1.17in
Timing gear: 1.29in
Top head bolts: 2.12in
ALL other 10mm where: 1.51 - 1.52in
Except the 4 lifter tray bolts which has a lip under the head ..
Nor did i measure the exhaust manifold bolts..
A Digital Caliper was used, measuring end to end.
Hope this helps ya
peace Thread Starter
Launching!
Joined: Feb 2015
Posts: 203
Likes: 6
Just measured most all the 10mm bolts..
Side Main Cap: 1.30in or ARP 1.28in
Timing gear thrust plate: 1.17in
Timing gear: 1.29in
Top head bolts: 2.12in
ALL other 10mm where: 1.51 - 1.52in
Except the 4 lifter tray bolts which has a lip under the head ..
Nor did i measure the exhaust manifold bolts..
A Digital Caliper was used, measuring end to end.
Hope this helps ya peace
Side Main Cap: 1.30in or ARP 1.28in
Timing gear thrust plate: 1.17in
Timing gear: 1.29in
Top head bolts: 2.12in
ALL other 10mm where: 1.51 - 1.52in
Except the 4 lifter tray bolts which has a lip under the head ..
Nor did i measure the exhaust manifold bolts..
A Digital Caliper was used, measuring end to end.
Hope this helps ya
peace 
