LS1TECH - Camaro and Firebird Forum Discussion

LS1TECH - Camaro and Firebird Forum Discussion (https://ls1tech.com/forums/)
-   Generation III Internal Engine (https://ls1tech.com/forums/generation-iii-internal-engine-5/)
-   -   it didn't last long. must read. (https://ls1tech.com/forums/generation-iii-internal-engine/180831-didnt-last-long-must-read.html)

blackbelt Jun 10, 2004 01:25 AM

it didn't last long. must read.
 
Well after 4 months with out my car got motor back about a week ago and put it in. All went well followed break in procedure and everything ran great except car needed to be tuned it was running rich. I use the word was because the motor is seized now. I was on the free way tonight and got on it a took it up to about 6k (keep in mind i did break in procedure to a t) out off no where a clunk and crash and my car is slowing down motor off i push in clutch and coast up a exit ramp. Tried to start again won't even crank starter tries to turn but seems like motor or something is locked up. Called AAA they come put it on truck and thats when I see the oil on the ground. No oil or anything behind on the ramp only oil where it was just sitting. Look and oil plug and filter are still in place. When car was droped off and i get in to put key in so we could push car low coolant come up on dic. i look under the hood again everything looks fine except it looks like there is coolant puddleing in right side motor mount area. I am at a complete loss as to what happened i can't even describe how angry i am now. 4 freaking months ago i decided to do heads and cam that didn't work out order new motor have to wait about another 3 months for it and a little over a week after i get it it appears as though it is done. I love Vettes so much but to be honest after hours and hours of work on it and and pouring out my own sweat and blood working on the stupid car i am sick of the dam thing it pisses me off just looking at it. Must be some sort of record thing had only like 560 some miles or so i think a little less. BTY I am still talking to company that built so for now i am not going to mention them as I don't wish to ruin a reputation unless they try to screw me over.

-Joseph- Jun 10, 2004 01:40 AM

That kinda stuff puts a sickening feeling in your stomach. What size motor did you build?

silverbeast Jun 10, 2004 01:46 AM

that really sucks!! i hope everything works out for you.

blackbelt Jun 10, 2004 02:08 AM


Originally Posted by -Joseph-
That kinda stuff puts a sickening feeling in your stomach. What size motor did you build?

It was a 347 while it lasted. Now its just a paper weight.

strokedls1 Jun 10, 2004 02:30 AM

You had to of lost a rod and or piston and knocked out a hole in the side of the block where the oil and coolant are coming out. It happened to me so I know the feeling. Hang in there.

35th SS Jun 10, 2004 03:45 AM

we had a fellow fbody here put a hole on the passenger side of his block.but he was running a maf plate 2stage n20 setup.good reason for him to do a buildup.good luck.

Billiumss Jun 10, 2004 07:11 AM

What was the engine warranty if any?

Orange Peel Jun 10, 2004 10:51 AM

Sucks to hear that dude, good luck getting the place to warranty the problem. Man that was a hard post to read, no commas to seperate the sentences, etc ugh.

Keenov Jun 10, 2004 11:06 AM

That sucks!

Yea, I had to read it very slowly. I also went back and read it over again.

blackbelt Jun 10, 2004 11:36 AM


Originally Posted by Orange Peel
Sucks to hear that dude, good luck getting the place to warranty the problem. Man that was a hard post to read, no commas to seperate the sentences, etc ugh.


Sorry i was upset when i wrote it. Didn't really feel like proper punctuation.

Orange Peel Jun 10, 2004 11:38 AM

No problem, I can't imagine what you are going through, so we forgive you :D

94form2000z Jun 10, 2004 12:56 PM

Sucks man. Hopefully it'll get tooken care of. Let us know.

ezss Jun 10, 2004 01:20 PM

as someone who has been there a number of times myself, I know how you feel. And its worse when you pay someone else to do the work and you still have problems. Contact the engine builder and see what they can do.

v8maro Jun 10, 2004 01:42 PM

So it was un-tuned and you took it to 6k?

BurnOut Jun 10, 2004 01:46 PM

How rich was it running?? If it was SUPER fat, I could see fuel getting into the oil and causing a bearing to spin/sieze... but to have it happen in so few miles, I dunno... even that explanation doesn't have the right "feel" to it.

Well, sorry to hear about it... good luck and let us all know how it shakes out with the builder...

taqwache Jun 10, 2004 09:23 PM

i know that you dont what to mention the name of the company, but are they a sponser? you could at least tell us that.

pdd Jun 10, 2004 09:29 PM

o man that sux. good luck with what u decide to do :angel:

blackbelt Jun 10, 2004 11:53 PM


Originally Posted by v8maro
So it was un-tuned and you took it to 6k?


It had my old tunning from my old tuning from old cam. It was rich but not to rich.

Mike K. Jun 11, 2004 12:15 AM

give us more specifics on the motor, what kind of rods/pistons did you have. Compression ratio, type of head and gaskets etc. Man I feel for you cause I have been screwed myself, it sucks. Probably the best thing to do is buy a used stock shortblock and trade the car in. Then call it a day. If I get screwed again myself this is what I am going to do.

badboy4life Jun 11, 2004 01:19 AM

That suxs i would be raiseing some hell!! good luck man.


All times are GMT -5. The time now is 06:18 PM.


© 2026 MH Sub I, LLC dba Internet Brands