Help with my TR 230/ TEA 5.3 combo
#1
Staging Lane
Thread Starter
Join Date: Dec 2002
Location: Etters, PA
Posts: 98
Likes: 0
Received 0 Likes
on
0 Posts
![Default](https://ls1tech.com/forums/images/icons/icon1.gif)
I'm swapping these on to a built ARE short block with Ross pistons. I'm looking to maximize power N/A, so I need some insight on head milling and CR. The heads were only milled .005 for clean up. I'd like to run a 11.2 or more CR. Any assistance with this would be a huge help.