compression and rod length
Thread Starter
Teching In
Joined: Mar 2016
Posts: 6
Likes: 0
compression and rod length Hey guys im new to the forum rhat being said im trying to put together a bottom end that will hold 800+hp no problems ....question is what will -4cc pistons with .927 wrist pin height due to my compression im also gonna be running turbo and do want to get lower than 10.5.1 compression so i can run e85 as daily
My brain hurts O.o
But seriously, to calculate your compression ratio we would actually have to know about your engine. Is it currently stock? Are you going to run stock heads with your turbo or aftermarket?
There are plenty of CR calculators online as well.
But seriously, to calculate your compression ratio we would actually have to know about your engine. Is it currently stock? Are you going to run stock heads with your turbo or aftermarket?
There are plenty of CR calculators online as well.
Hey guys im new to the forum rhat being said im trying to put together a bottom end that will hold 800+hp no problems ....question is what will -4cc pistons with .927 wrist pin height due to my compression im also gonna be running turbo and do want to get lower than 10.5.1 compression so i can run e85 as daily
