Help with cam selection
#1
11 Second Club
Thread Starter
iTrader: (20)
Join Date: Dec 2004
Location: chicago
Posts: 384
Likes: 0
Received 0 Likes
on
0 Posts
Help with cam selection
I used to have a ta with the g5x3. I want to do a big cam and was looking into the ms3 or ms4 but now I'm reading that those are old news. Any recommendations?
#4
TECH Senior Member
iTrader: (26)
Why? LS1 has been around since 1997...about every cam and lobe option possible has been spec's and put on the shelf. Sure you can get a custom variant of let's say a MS3 and add or subtract a degree of duration with a slight change in lift but it is not going to make a Significant difference in power.
Custom definitely still has it's place with big cube or fi builds but I do not see a point with your average LS1 build.
That being said TSP is using new proprietary lobes on their camshafts, so I would not hesitate to run any of their products.
Custom definitely still has it's place with big cube or fi builds but I do not see a point with your average LS1 build.
That being said TSP is using new proprietary lobes on their camshafts, so I would not hesitate to run any of their products.