I dont want to spend $500 on a set of lifters. Ill be orderimg a set shortly. Which do you guys recommend? Ls7 replacements or the cadi lifters?

 

What's the details of the valve train? Valves? Springs? Retainers?
What rpm do you want to rev to?

GM lifters can turn 8,000 + rpm with a very light valve train.

 

Have used LS7 and Comp R lifters with with no problems.

 

I would go with the morel 5315 lifters. Better than stock put not overpriced.

 

2005 cadi 6.0. Ai 243's, 236/242 cam revs to 7000rpm. Btr duals, btr trunion stock rockers

 

I am running 35k mile stock lifters to 7k rpms with ls6 heads btr dual springs and titanium retainers. No complaints

 

I went with the morel 5315 for my build, from the sound of it, they are a slight upgrade over the ls7. I haven't read any threads with them failing, but I have seen a few ls7 failures in multiple threads. Not sure how much of a difference there really is, but that's what I found during my searching.

 

What he said X2

 

LS7 for a good cheap replacement, or Morel like said above.