Correct Pushrod length?
05-26-2017, 09:11 PM
#1
On The Tree
Thread Starter
Join Date: Jul 2011
Location: San Diego,CA
Posts: 178
Likes: 0
Received 0 Likes
on
0 Posts
Correct Pushrod length? My installer just measured for Pushrods and came out to 7.70. Does that seem a bit long to anyone?
Mods are Tfs 220 as casts, GM MLS gaskets, Johnson 2116lsr lifters, Titan IV cam, and stock rockers on an LS1 block.
Mods are Tfs 220 as casts, GM MLS gaskets, Johnson 2116lsr lifters, Titan IV cam, and stock rockers on an LS1 block.
05-26-2017, 10:08 PM
#2
Moderator
iTrader: (4)
Join Date: Jul 2014
Location: My own internal universe
Posts: 10,446
Received 1,838 Likes
on
1,146 Posts
Aftermarket heads and Johnson short travels tends to be that long.
05-27-2017, 01:32 AM
#3
On The Tree
Thread Starter
Join Date: Jul 2011
Location: San Diego,CA
Posts: 178
Likes: 0
Received 0 Likes
on
0 Posts
05-27-2017, 10:12 AM
#4
Moderator
iTrader: (4)
Join Date: Jul 2014
Location: My own internal universe
Posts: 10,446
Received 1,838 Likes
on
1,146 Posts
Originally Posted by JTtransAM
Cool, just wanted to make sure. The lifters aren't the short travel variants, but they are shorter than the stockers. Nice build btw, I've read your thread start to finish.
Edit - the 7.7" got me the first time too