Help on Push rod length
Thread Starter
Staging Lane
Joined: Jul 2017
Posts: 59
Likes: 0
Help on Push rod length Hey guys,
I decided to do the Magic Stick 3 cam. I am planning on getting the TSP .660" Polished Dual Spring Kit with PAC Valve Springs and Titanium Retainers. Thoughts on that?
Also as far as the push rods go. What length would be best? The motor is stock. This is the first internal upgrade to the motor. From what I have read 7.4 push rods are what some other people have used. But I want to make sure.
Thanks in advance,
I decided to do the Magic Stick 3 cam. I am planning on getting the TSP .660" Polished Dual Spring Kit with PAC Valve Springs and Titanium Retainers. Thoughts on that?
Also as far as the push rods go. What length would be best? The motor is stock. This is the first internal upgrade to the motor. From what I have read 7.4 push rods are what some other people have used. But I want to make sure.
Thanks in advance,
The best approach is to not buy pushrods until the cam is in and in the meantime buy an adjustable pushrod to measure. Once the cam is in, measure for length and then buy 11/32" OD pushrod from Manton.
