Generation III Internal Engine 1997-2006 LS1 | LS6
Sponsored by:
Sponsored by:

LS1 h/c swap tps code.

Old Feb 17, 2018 | 07:40 PM
  #1  
MistakenGeneral's Avatar
Thread Starter
Teching In
 
Joined: Aug 2017
Posts: 13
Likes: 0
Default LS1 h/c swap tps code.

Ive replaced the sensor, pig tail, tps mail order tune. Im gonna take it to a shop cause I cant for the life of me figure it out, I think itll run good on this tune, im not sure im new to gen 3s. Ive checked all grounds and i cant get rid of the code and it surges and what not. Any help would be awesome but i lack knowledge. My last bet would be to get a scanner and check the way the sensor is working. Its turned into a nightmare at this point. Car will run, but shutoff at WOT and require a relearn or unplug the sensor.
Reply


Thread Tools
Search this Thread

All times are GMT -5. The time now is 04:30 PM.