2006 5.3
Thread Starter
Teching In
Joined: Sep 2012
Posts: 5
Likes: 0
2006 5.3 can you guys tell me what the plug called ECT is and where it plugs to? this wire is in a MSD wire harness and I am ready to start the motor for the first time.
Ok seems like that was a dumb question. sorry
I have a Fast EFI fuel sys and a MSD ign sys and both have a ect plug I also have a manual gage in the car. my problem now is that I can only find 2 places to have sending units, one in each head. any ideas where I can read the third ECT from?
my motor is 2006 5.3
Ok seems like that was a dumb question. sorry
I have a Fast EFI fuel sys and a MSD ign sys and both have a ect plug I also have a manual gage in the car. my problem now is that I can only find 2 places to have sending units, one in each head. any ideas where I can read the third ECT from?
my motor is 2006 5.3
Last edited by Manley Houghtalen; Oct 29, 2018 at 02:07 PM.
Thread Starter
Teching In
Joined: Sep 2012
Posts: 5
Likes: 0
I have a sender in both cyl heads one for the msd one for the fast efi and needed one for the gage in the dash I used a fiting in the upper rad hose.
I tried to start the motor today but no spark.
I am lost now.
I tried to start the motor today but no spark.
I am lost now.
