Mavns Summit cam build. Just made 450+ rwhp.. Stage 2 cam aka the Tire Puller...
#444
Moderator
iTrader: (4)
Join Date: Jul 2014
Location: My own internal universe
Posts: 10,452
Received 1,852 Likes
on
1,152 Posts
Oh so you found a happy dyno AND a downhill track???
JK - nice work mavn. Shows a lot of what hio says about doing the right mods vs the most mods. Nice to see more done with less.
JK - nice work mavn. Shows a lot of what hio says about doing the right mods vs the most mods. Nice to see more done with less.
#446
TECH Veteran
iTrader: (1)
well i only made thrre passes. Had some laptop logging issues so my tune wasn’t getting dialed in right. O well. Then I broke something as soon as it hit boost in 1 gear on the fourth pass. 11.20 at 125 with a 1.7560ft leaving right off idle out of boost. Got more in it yea, I was only on 10lbs boost too.
#448
TECH Senior Member
well i only made thrre passes. Had some laptop logging issues so my tune wasn’t getting dialed in right. O well. Then I broke something as soon as it hit boost in 1 gear on the fourth pass. 11.20 at 125 with a 1.7560ft leaving right off idle out of boost. Got more in it yea, I was only on 10lbs boost too.
#453
TECH Junkie
iTrader: (2)
Good runs today Mavn. Yes sadly I got copper in my oil filter. I lost oil pressure on my second pass but was way down on power compared to what the dyno showed thursday.
I should have been trapping 130-134 with today's weather. But only ran 10.85@124.3 1.54 -60 ft.
Motor coming back out to find what happened
I should have been trapping 130-134 with today's weather. But only ran 10.85@124.3 1.54 -60 ft.
Motor coming back out to find what happened
#456
LS1Tech Sponsor
Join Date: Jan 2008
Location: Ohio, Georgia, Nevada, Texas
Posts: 2,031
Received 1,241 Likes
on
668 Posts
#457
LS1Tech Sponsor
Join Date: Jan 2008
Location: Ohio, Georgia, Nevada, Texas
Posts: 2,031
Received 1,241 Likes
on
668 Posts
Good runs today Mavn. Yes sadly I got copper in my oil filter. I lost oil pressure on my second pass but was way down on power compared to what the dyno showed thursday.
I should have been trapping 130-134 with today's weather. But only ran 10.85@124.3 1.54 -60 ft.
Motor coming back out to find what happened
I should have been trapping 130-134 with today's weather. But only ran 10.85@124.3 1.54 -60 ft.
Motor coming back out to find what happened