Help 5.3 whine video attachéd
Hopefully that solves your problem. It would suck to go through all of that and still have the same issue. I was thinking the teeth of the flywheel where coming into contact with the starter.
Do you see anything?
This
Thread Starter
Teching In
Joined: Dec 2018
Posts: 15
Likes: 0
I looked at flywheel and starter closely when I removed it from the motor no marks at all. I got the newish motor is today but install took a little longer than I thought with the yard snapping 7 manifold bolts off flush with the head so that was fun welding nuts to remove the bolts. I was installing the manifold and got a little agressive and ripped the threads out of the head. That was my stopping point dropped the tools and walked away. Tomorrow we will know
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Gas Monkey Built a 6-Wheel Ferrari Testarossa With a Corvette LT4 Engine
Verdad Gallardo
7 Most Reliable High-Performance Engines GM Has Ever Built
Verdad Gallardo
Amazing '71 Camaro Restomod Is Modern Muscle Car Under the Skin
Verdad Gallardo
6 Common C5 Corvette Failures and What's Involved In Repairing Them
Pouria Savadkouei
Retro Modern Bandit Pontiac Trans AM Comes With Burt Reynolds' Autograph
Verdad Gallardo
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo Thread Starter
Teching In
Joined: Dec 2018
Posts: 15
Likes: 0
Well I feel super dumb. New motor same results went a little deeper with the carb spray and noticed a leak on the back of the carb. I piece of metal was under the carb to manifold gasket cause a nasty vac leak and making all those noises. So 900 dollars later and 10 hours of work the motor runs fine. Thanks everyone for the help and suggestions.
Well I feel super dumb. New motor same results went a little deeper with the carb spray and noticed a leak on the back of the carb. I piece of metal was under the carb to manifold gasket cause a nasty vac leak and making all those noises. So 900 dollars later and 10 hours of work the motor runs fine. Thanks everyone for the help and suggestions.
Oh man that sucks big time, but one good thing is you'll never forget this lesson. It's that way sometimes. Happens to all of us.
Sell one of them motors and get your brakes and suspension
TECH Senior Member
Joined: Jun 2016
Posts: 22,298
Likes: 3,619
From: Central Cal.
My wife absolutely LOVES it (<----- satire)
I don't know about you but I literally cannot stop it. The crazy and stupid things people say to me all day every day makes it impossible.
TECH Senior Member
Joined: Jun 2016
Posts: 22,298
Likes: 3,619
From: Central Cal.
SOOOO many times on these forums.... the real me would have been banned a long time ago.. LOL
11 Second Club
Joined: Dec 2016
Posts: 665
Likes: 5
Pooter,
Yes sir, I am in Texas about thirty minutes outside Dallas, where you at? The door is always open and there is beer in the fridge come on over. I don't call it being a smart ***, it's called sarcasm, makes my world go round. Happy New year brother.
Yes sir, I am in Texas about thirty minutes outside Dallas, where you at? The door is always open and there is beer in the fridge come on over. I don't call it being a smart ***, it's called sarcasm, makes my world go round. Happy New year brother.