TSP Bald Eagle Cam
#1
TSP Bald Eagle Cam
Hi
I am putting together a twin turbo iron 5.7 (5.3 based)
Static compression is going to be in the 9.1:1 range
TFS Gen X 205 heads
Edelbrock victor jr
CSU Blow Through carb
Twin 72/68 turbos with a water to air intercooler
E85 for fuel
I am seriously looking at the TSP "Bald Eagle" cam, or anything else that would be recommended. The engine will be in a jet boat, so it acts like a loose convertor. Peak RPM im okay with in the 6000-7500 RPM Range.
I also looked at the LS9 cam, but anything else that may be recommended im open to.
I would like the engine to start making positive pressure somewhere around 3500-4000. But this is my first turbo setup and i dont know much about them yet
Thanks for any insight about the TSP cam or anything else they offer or anyone else you would recommend
Thanks
I am putting together a twin turbo iron 5.7 (5.3 based)
Static compression is going to be in the 9.1:1 range
TFS Gen X 205 heads
Edelbrock victor jr
CSU Blow Through carb
Twin 72/68 turbos with a water to air intercooler
E85 for fuel
I am seriously looking at the TSP "Bald Eagle" cam, or anything else that would be recommended. The engine will be in a jet boat, so it acts like a loose convertor. Peak RPM im okay with in the 6000-7500 RPM Range.
I also looked at the LS9 cam, but anything else that may be recommended im open to.
I would like the engine to start making positive pressure somewhere around 3500-4000. But this is my first turbo setup and i dont know much about them yet
Thanks for any insight about the TSP cam or anything else they offer or anyone else you would recommend
Thanks
#2
I'm sure it would perform good.. But why don't just get a btr or ljms turbo cam for your application? Many or there cams are running 4s in the 1/8th so that's what I would run.