PRC head install done.
My winter project, PRC 220 heads, Holley tall valve covers, new coils, etc. I got it all buttoned up, and test ran it for several minutes. Everything seems good, no coolant leaks, so it looks like the head gaskets sealed. I also put in the Lunati link bar lifters, and Summit 11/32" .120 wall pushrods. Valve train is very quiet. So far, so good, now off to the tuner.
Trending Topics
I wound up with 416 wheel on PRC ported 243/799 heads on a Mustang Dyno using a smallish BTR stage 2 cam. Depending on your cam I think you will easily make 425.
The Best V8 Stories One Small Block at Time





