frige

6.0 lq4 with dish pistons. stock 243 heads and a elderbrock intake with a 750 carb. Transmission is a 4l80 with a at least 3500 stall. Its in a 69 camaro. Its going to be a daily driver with trips to the track every once in a while. Ideas?

SLP IROC-Z

iTrader: (14)

Call Cam Motion

SAPPER

iTrader: (10)

X2 on calling Cam Motion. Talk to Bobby.

Ls7colorado

iTrader: (3)

Summit 8702 because no 69 camaro is a DAILY DRIVER

frige

I talked to Bobby at Cam motion and he recommended the 03-01-0075. 227 intake duration and 237 exhaust. 595 intake lift and 586 exhaust on a 111 lobe separation. The summit 8702 cam is a Stage 3 LS Single Plane Cam, 236/246 110 +0 .612/.612 Lift. So it is a nastier grind for sure. I am planing on milling the heads at least 20 thousands. How would the ptv clearance be on the summit cam?

Bspeck82

Which eddy and how much does the car weigh? Power steering/brakes and AC? How much gear?

big hammer

Jake @ HorseCock cams is great too

frige

Not sure about the weight. Probably a 4.11 gear with a manual 4l80. No power anything and no a/c. Just a noisy nasty hot rod.

frige

Ls7colorado

iTrader: (3)

I ran the 8702 summit cam with factory flat top pistons a .045 head gasket with 243 heads milled .010 beyond that im not sure on PTV