Well is anyone runing this type of heads with stock bottom end,and want to
know what size of cam are ya'll runing
my heads are 205/160 unmill.

 

I'm using 2E's with a C1 right now. The cam is a 222/222 .566/112. It sees 6700 from time to time.

 

2r's like the x1. more than a few people made 445 rwhp with that setup. specs are 230 227 .591 .571 lsa112 or 114

 

I'm running the Stage 2E's and a X1 cam.

 

thank's guy's 4 the reply

 

Yeah but how many are running big cams over 232 duration and 580-600 lift?

 

i think jeff is getting at the g5x2 you were talking about. i'm with him on that. i wouldn't put that cam in. the biggest i would put in would be a FMS f13. its bigger than the x1, and is on a traditional split rather than a reverse split. mti also has a g1 cam out now, with is 228 232 .588 .575 lsa 113. it's what they're billing as their nitrous cam, but it should work well in n/a application too.

 

Jordan good guess but Sal already knows the G5X2 is too big for his application we are looking at a coulple of custom grinds that we cam up with and were just trying to get an idea of what other people are running etc... The G5X2 is 232/240 not where we are talking about etc... We were looking at 232 588 238 595 112LSA I have a back up if there is going to be an issues of valve clearance etc... That is what we are getting at LOL!

 

Thank's Jeff for clearing it up for me
SAL