Generation III Internal Engine 1997-2006 LS1 | LS6
Sponsored by:
Sponsored by:

Help

Thread Tools
 
Search this Thread
 
Old Nov 5, 2004 | 03:38 PM
  #1  
hold's Avatar
Thread Starter
Teching In
 
Joined: Jun 2004
Posts: 22
Likes: 0
Default Help

Hi gause please raer my combnition and anouwer my questions
My combnition is:
-K&N Air Filter
-Ported stock MAF and Throttel
-LS6 Intaeke
-ASP polly
-Lounti Cam Shaft Lift:558.558 Dur:221.221 LSA 114
-Polish LS1 Haeds . 2.08/1.60 valves
-Headers
-X Pipe Exhaust
-Torqu Convertor
-LS1 edit
My questions is :
1-what is my mistake in this combnition?
2-Why i did not teak full power from this combnition?
3-haw mutch do you think my HP?
4-Did this combnition is street use?
5-Wht i have to shenge to be in the save side?
6-Wht about my feuol system and other stock parts?
Reply
Old Nov 5, 2004 | 05:22 PM
  #2  
Bo White's Avatar
TECH Addict
20 Year Member
iTrader: (59)
 
Joined: Oct 2004
Posts: 2,357
Likes: 0
From: Vance, Alabama
Default

Slow down. Main thing is what is done to your heads besides polish and big valves, if that is all then you will probably be around the 360 mark on hp. Other than that I say it looks pretty good.
Reply




All times are GMT -5. The time now is 11:15 PM.