ARP Studs Question
#2
TECH Fanatic
Join Date: Apr 2003
Location: Albuquerque, NM
Posts: 1,109
Likes: 0
Received 0 Likes
on
0 Posts
Very little. They are torqued to 22 ft/lbs ONLY after all the other bolts have been final torqued.
Seems like they are there to keep oil blowby to a minimum as there is no direct oiling or pooling in the area...
Seems like they are there to keep oil blowby to a minimum as there is no direct oiling or pooling in the area...