VHP 056 Boss 2 cam
Thread Starter
Launching!
Joined: Sep 2004
Posts: 245
Likes: 0
VHP 056 Boss 2 cam Anyone out their have the new Vinci 056 cam. It's very similar to the 055, but looks like it should have a bit more low nd torque, and should idle much better with an LSA of 115+.
056
DUR @ .004" 278*/286*
DUR @ .050" 216*/224*
LIFT .551/.551
OVERLAP 53*
LSA 115*
SAME AS THE BOSS WITH BETTER LOW END"BOSS 2"
STREET / STRIP CAM / AUTOCROSS
RPM RANGE 1500 TO 6200
TUNING & STALL CONVERTER DESIRED
PLENTY OF "TORQUE"
POWERFUL CHOPPY IDLE
056
DUR @ .004" 278*/286*
DUR @ .050" 216*/224*
LIFT .551/.551
OVERLAP 53*
LSA 115*
SAME AS THE BOSS WITH BETTER LOW END"BOSS 2"
STREET / STRIP CAM / AUTOCROSS
RPM RANGE 1500 TO 6200
TUNING & STALL CONVERTER DESIRED
PLENTY OF "TORQUE"
POWERFUL CHOPPY IDLE
TECH Addict
Joined: Oct 2003
Posts: 2,620
Likes: 0
From: Central, MA
A bit of a bump.
I'm looking into this cam too. (I know SS5.3 will get on me about this
)
I like the increase in power-range compared to my 047 which is pretty accurately rated at 1,900-6,000.
My cam has a light cackle at idle - I want to say that the Boss2/Trucker will idle cleaner based off of the power-ranges, but it 'does' have one more degree of overlap so I'm not certain.
I'm looking into this cam too. (I know SS5.3 will get on me about this
)I like the increase in power-range compared to my 047 which is pretty accurately rated at 1,900-6,000.
My cam has a light cackle at idle - I want to say that the Boss2/Trucker will idle cleaner based off of the power-ranges, but it 'does' have one more degree of overlap so I'm not certain.
