Cam upgrade.....
Thread Starter
Joined: Nov 2001
Posts: 7,303
Likes: 4
From: Delray Beach, Fl.
Cam upgrade..... Right now I'm running the times in my sig but I'm afraid to pull the cam out and see no improvement or actually have it slow down.
My heads seem to like the single pattern style cam.I'm running a TR224 on a 114 +4 so I'd like to stay in that area (114 to 112 +2 to +4) ...The most important thing is for me to get at least .2 in ET/2MPH out of the change.
I was thinking of something on the lines of 230 to 236 with 59X lift on a 113 +2?
EG 230-230 590-590 113+2
EG 236-236 595-595 113+2
I run threw a cutout so that would be a determing factor plus I have a TP4200/4.10 combo and it drops from 6500 back to 55/5600 on the shifts.
Any help......
My heads seem to like the single pattern style cam.I'm running a TR224 on a 114 +4 so I'd like to stay in that area (114 to 112 +2 to +4) ...The most important thing is for me to get at least .2 in ET/2MPH out of the change.
I was thinking of something on the lines of 230 to 236 with 59X lift on a 113 +2?
EG 230-230 590-590 113+2
EG 236-236 595-595 113+2
I run threw a cutout so that would be a determing factor plus I have a TP4200/4.10 combo and it drops from 6500 back to 55/5600 on the shifts.
Any help......
Good Luck with it! 
