BAM-BAM

iTrader: (2)

ABSOLUTE STG2 HEADS MILLED .020 STOCK GM GASKETS DIAMOND PISTONS WITH A -7CC CUT. 383 MOTOR IF THAT MAKES ANY DIFFERENCE
3.903 BORE..JUST DONT KNOW HOW TO GUESS ON THIS ONE ANY HELP ?

jrp

iTrader: (16)

deck height and head casting?

BAM-BAM

iTrader: (2)

the deck height was stock, just cleaned up during the shortblock the heads are 98's i believe the casting number is 843..permiter bolt covers..though i am not sure on the deck height.. would the -7cc be costing me compression and hp? thanks for the help just dont know alot about trying to figure this out... i looked at the sticky but i'm guessing on cc's..withe pistons milling etc...does the 4.00 crank have any effect on cr?

jrp

iTrader: (16)

i come up with 10.5CR using

3.903
4.00
66cc
.054
3.910
-.008
-7cc