Looking for: Flow # thru manifold & stub
Thread Starter
TECH Veteran
iTrader: (6)
Joined: Nov 2003
Posts: 4,397
Likes: 0
From: Tallahassee, FL
Looking for: Flow # thru manifold & stub Has anyone had their heads flowed with a stub pipe, or some style of exhaust and the intake manifold in place?
I'd be interested in checking out the numbers...
If you could help, that would be most appreciated.
I'd be interested in checking out the numbers...
If you could help, that would be most appreciated.
Thread Starter
TECH Veteran
iTrader: (6)
Joined: Nov 2003
Posts: 4,397
Likes: 0
From: Tallahassee, FL
Just thought I'd check again... anybody have any flow numbers? I thought it would interesting to see what the extras do the flow numbers and then, how much exhaust-intake percentages change.
my FFHP's
PP Ls6 style
and check my FAQ for the intake manifold test. the above PP head was used for testing.
oh yeah, both were on the same bench sf1020, same 3.905 bore, and 1 3/4 pipe.
PP Ls6 style
and check my FAQ for the intake manifold test. the above PP head was used for testing.
oh yeah, both were on the same bench sf1020, same 3.905 bore, and 1 3/4 pipe.
Last edited by jrp; Apr 28, 2005 at 09:45 PM.
Here are my Exhaust #s with and production 1.55 valve with and without a pipe independently done:
with 1 7/8" pipe
.200 114
.300 144
.400 179
.500 208
.600 222
without
.200 109
.300 138
.400 165
.500 191
.600 202
I did not have the intake ports flowed with an intake so I didnt post em
with 1 7/8" pipe
.200 114
.300 144
.400 179
.500 208
.600 222
without
.200 109
.300 138
.400 165
.500 191
.600 202
I did not have the intake ports flowed with an intake so I didnt post em
