i am going to have a 383 or 395 stroker built with lunati parts and i was wondering about the pro's and con's of each

 

The only diffrence in the 2 will be the stroke. The 382 will have a 4.00 and the 395 will have a 4.125. The 395 will have agood bit of side load on the piston/bore which could lead to premature wearing. This is due to the stroke being so much larger than the bore. Personally, I'd just use a LS-2 block with the 4.00 stroke and get a 402.

 

And with the 395, you will have to grind out notches in the block where your rods will hit the block. how do I know that...?

https://ls1tech.com/forums/attachmen...chmentid=16561

The Lunati kit is beautiful. You'll be happy with either choice.

David

 

Some 382's require grinding the block also. It just depends on who's rods you use.

 

It would be Lunati pro billet rods