Generation III Internal Engine 1997-2006 LS1 | LS6
Sponsored by:
Sponsored by:

Next mod???

Thread Tools
 
Search this Thread
 
Old May 1, 2005 | 09:04 PM
  #1  
TN94Z's Avatar
Thread Starter
TECH Fanatic
20 Year Member
Photogenic
iTrader: (14)
 
Joined: Sep 2003
Posts: 1,311
Likes: 0
From: Tennessee
Default Next mod???

Didn't really know where to put this..My best run so far with the mods in the sig is a 7.92 with a 1.75 60ft(that was NA, haven't sprayed it yet). Anyway, my 60's could be a little better, but that run was on DR's and not slicks. I am thinking of my next mod and don't really know what direction I should go. Should I get 3.73's to get me out of the hole...suspension to help the 60ft...or a cam to add more power??? I can't make my mind up here, so I figured I would ask for advice from anyone that has gone both directions and what was the best improvement. Thanks in advance
Reply
Old May 1, 2005 | 09:23 PM
  #2  
Full-Force's Avatar
TECH Junkie
20 Year Member
Photogenic
Photoriffic
Shutterbug
iTrader: (11)
 
Joined: Aug 2004
Posts: 3,070
Likes: 5
From: Upstate of SC
Default

your 60' aint bad ... i would cam in now
Reply
Old May 1, 2005 | 09:28 PM
  #3  
TN94Z's Avatar
Thread Starter
TECH Fanatic
20 Year Member
Photogenic
iTrader: (14)
 
Joined: Sep 2003
Posts: 1,311
Likes: 0
From: Tennessee
Default

That is what I am thinking. I have sent a few sponsors some emails on a cam. The 60 is pretty descent. I have a set of slicks that I haven't used yet, so I know that I can get the 60's a little lower with those
Reply
Old May 1, 2005 | 10:02 PM
  #4  
cyphur's Avatar
TECH Senior Member
iTrader: (10)
 
Joined: Mar 2003
Posts: 8,009
Likes: 0
From: North Texas
Default

I'd go for a cam, or full suspension. Either one would shave off times....question is which would be more fun for you?
Reply




All times are GMT -5. The time now is 08:43 AM.