Hey guys this is my first cam and timing chain install and i decided to try it out myself before i go have the cam degreed...just wanna see if this looks right for Dot 2 Dot...this is for the T-REX cam..its going in a 382 stroker with tea 1.5 5.3L heads with 2.02 intake and 1.55 exhaust,PRC gold dual valve springs, diamond pistons with 7cc valve reliefs. also i just ordered the head gaskets for a 5.3L head...is that correct or should i order the cosmetic gaskets from thunderracing for a 3.905 bore...i believe both gaskets are same thickness...on the gaskets am i supposed to match the bore size or the CC of the head size...thanks for the INfo and pics are below...ill but up a few so you can get a good look at the double roller.... and here are the camshaft SPECS also

 

Ttt...

 

Well, on further inspection, I think you got it down good.

 

Its scary, I know how you feel. I went through the same thing when I did mine. It looks lined up good to me though, you can tell when its off a tooth. Mine was the first time I got it on but I caught it by turning it around, man was I glad I checked it twice. Good luck with the rest of the install.

 

Looks good. I don't know how close your PTV will be with that setup though, dot to dot isn't the most foolproof way.

 

Anyone have info on the gaskets...also so my PtV clearance be ok with the valve reliefs...thanks again for any help..