Heads, LSX, or Spray
Thread Starter
TECH Enthusiast
Joined: May 2004
Posts: 666
Likes: 0
From: DFW/Waco, TX
Heads, LSX, or Spray Trying to figure out what i should do with my car next, which would be the safest way to go. my mods include
Lid/K&N
Jantzer Ported TB
Pacesseter LTs
ORY
FAST LSX 78mm Man.
Pulley
3.73s
FMS F14 Cam
PRC Kit
Built Midwest 3600.
Should I change out the LSX for the 90/90 setup and sell my lsx and tb.
Or should i just buy heads and keep the tb and small lsx.
Or should i just spray it?
this is a semi daily driver. Im goin to college so it will pretty much sit in the garage for most the week and drive on the weekends.
I can do any of these here in the next month or 2 but it will probably be my last mod for awhile, because im going to school and not gunna have a job.
Lid/K&N
Jantzer Ported TB
Pacesseter LTs
ORY
FAST LSX 78mm Man.
Pulley
3.73s
FMS F14 Cam
PRC Kit
Built Midwest 3600.
Should I change out the LSX for the 90/90 setup and sell my lsx and tb.
Or should i just buy heads and keep the tb and small lsx.
Or should i just spray it?
this is a semi daily driver. Im goin to college so it will pretty much sit in the garage for most the week and drive on the weekends.
I can do any of these here in the next month or 2 but it will probably be my last mod for awhile, because im going to school and not gunna have a job.
well...fast w/90mm would net you 15-18 hp $1,200ish
afr heads will net you near 40hp $2,000-2,300ish
a t.n.t-nx kit would run $700-900 and gain you near 90hp for 100 jet and 120-130hp for 150 jet.
best bang for the buck is the spray.
afr heads will net you near 40hp $2,000-2,300ish
a t.n.t-nx kit would run $700-900 and gain you near 90hp for 100 jet and 120-130hp for 150 jet.
best bang for the buck is the spray.
TECH Enthusiast
Joined: Dec 2004
Posts: 576
Likes: 0
From: Chattanooga
Originally Posted by 99CamaroSS_
but also with the fast 90/90 setup i could shave at least 500 off for selling my lsx and tb.
Thread Starter
TECH Enthusiast
Joined: May 2004
Posts: 666
Likes: 0
From: DFW/Waco, TX
thats not a bad deal brent. I just bought a PRC Dual Kit. For my F14.
What would you expect me to be at power wise with, the 5.3 heads. From what i have now.. Im hoping for 390 with this cam. Heads could be anywhere from 20-40 and i have heard good things from the 5.3 stage 1.5s.
What would you expect me to be at power wise with, the 5.3 heads. From what i have now.. Im hoping for 390 with this cam. Heads could be anywhere from 20-40 and i have heard good things from the 5.3 stage 1.5s.
Trending Topics
LS1 Tech Stories
The Best V8 Stories One Small Block at Time
Top 10 Greatest Cadillac V Series Performance Models Ever, Ranked
Pouria Savadkouei
Top 10 Most Powerful Chevy Trucks Ever Made!
Hennessey's New Supercharged Silverado ZR2 Has 700 HP
Verdad Gallardo
Coachbuilt N2A Anteros Is an LS2-Powered C6 Corvette In Italian Clothes
Verdad Gallardo
Awesome K5 Blazer Restomod Comes With C7 Corvette Power
Verdad Gallardo
10 Camaros You Should Never Buy
10 LS Engine Myths That Refuse to Die
Verdad Gallardo
Five Reasons the Camaro Was the Most Pivotal Player in the Pony Car Wars 2.0
Brett Foote
10 Reasons the LS7 Is GM's Most Extreme Naturally Aspirated V8 Engine Ever
Verdad Gallardo Thread Starter
TECH Enthusiast
Joined: May 2004
Posts: 666
Likes: 0
From: DFW/Waco, TX
well if you want give me about 5 grand ill do a turbo!!
Ill have about 2,000 here soon. Im gunna pick one of these 3 just dont know which yet. OF THE THREE which would you suggest
Ill have about 2,000 here soon. Im gunna pick one of these 3 just dont know which yet. OF THE THREE which would you suggest
Thread Starter
TECH Enthusiast
Joined: May 2004
Posts: 666
Likes: 0
From: DFW/Waco, TX
Originally Posted by Orange Peel
I'd say heads, you will get good gains and have them all day long, not when you have a full bottle, etc.
I will be doing heads as well in the next month or so.
I will be doing heads as well in the next month or so.
Originally Posted by 99CamaroSS_
Is there anywhere i can compare all these flow numbers.. what are the best heads for the money? i have heard alot about TEA and TSP and AFR's. Which is the best for the money? that price of 1300 for some TEA heads is really good. I just want to know what gains i would see from those compared to say AFR 225s.
Thread Starter
TECH Enthusiast
Joined: May 2004
Posts: 666
Likes: 0
From: DFW/Waco, TX
Originally Posted by Orange Peel
Take a look at PRC from Jason @ Texas Speed, GREAT deal and they work! That's who I will be going with to mate up with my G5X4 cam, I will need to flycut but you gotta do whatever it takes to go fast
Originally Posted by 99CamaroSS_
hmm will do. Will i need to flycut with my F14 if i get some stage 1.5s or 2?
Should be worth it though.
Thread Starter
TECH Enthusiast
Joined: May 2004
Posts: 666
Likes: 0
From: DFW/Waco, TX
Originally Posted by Orange Peel
Probably, that F14 is fairly large, and if you want to bump up the compression you would need to mill the heads, and I'm betting your are cutting it close with stock heads, milled heads with larger valves will need flycutting.
Should be worth it though.
Should be worth it though.
You can do it yourself by renting the flycutting tool, or you can have a shop do it for you. Just depends on your comfort level with working on your car, etc. I plan to do it myself.
