Generation III Internal Engine 1997-2006 LS1 | LS6
Sponsored by:
Sponsored by:

Fast 90/90 too much?

Thread Tools
 
Search this Thread
 
Old 05-21-2005 | 12:25 PM
  #1  
dbhajek's Avatar
Thread Starter
Staging Lane
 
Joined: Nov 2004
Posts: 60
Likes: 0
From: Alexandria, VA
Default Fast 90/90 too much?

Do you all think a Fast 90 with with a LS2 TB to much on a cam only Z06? The Cam will be a F13. Will I lose HP?

I do plan on going with heads in the near future, either AFR 205s or the small chamber 225s when they come out.

Thanks
Bud
Old 05-21-2005 | 12:31 PM
  #2  
99CamaroSS_'s Avatar
TECH Enthusiast
 
Joined: May 2004
Posts: 666
Likes: 0
From: DFW/Waco, TX
Default

nope. The 90/90 setup works good with h/c cars. With that F13 and later on heads, the 90/90 your going to want.
Old 05-21-2005 | 12:32 PM
  #3  
Patrick G's Avatar
LS1 Tech Administrator
iTrader: (14)
 
Joined: Nov 2001
Posts: 8,245
Likes: 32
From: Victoria, TX
Default

It won't be too much. You should maintain your low rpm hp and tq and should gain 10-15 rwhp up high.
__________________

2013 Corvette Grand Sport A6 LME forged 416, Greg Good ported TFS 255 LS3 heads, 222/242 .629"/.604" 121LSA Pat G blower cam, ARH 1 7/8" headers, ESC Novi 1500 Supercharger w/8 rib direct drive conversion, 747rwhp/709rwtq on 93 octane, 801rwhp/735rwtq on race fuel, 10.1 @ 147.25mph 1/4 mile, 174.7mph Half Mile.
2016 Corvette Z51 M7 Magnuson Heartbeat 2300 supercharger, TSP LT headers, Pat G tuned, 667rwhp, 662rwtq, 191mph TX Mile.
2009.5 Pontiac G8 GT 6.0L, A6, AFR 230v2 heads. 506rwhp/442rwtq. 11.413 @ 121.29mph 1/4 mile, 168.7mph TX Mile
2000 Pewter Ram Air Trans Am M6 heads/cam 508 rwhp/445 rwtq SAE, 183.092 TX Mile
2022 Cadillac Escalade 6.2L A10 S&B CAI, Corsa catback.
2023 Corvette 3LT Z51 soon to be modified.
Custom LSX tuning in person or via email press here.

Old 05-21-2005 | 02:05 PM
  #4  
JZ'sTA's Avatar
Banned
iTrader: (23)
 
Joined: Jan 2004
Posts: 3,126
Likes: 2
From: Ft. Myers Fl
Default

I would do it also.
It is a real nice upgrade.




All times are GMT -5. The time now is 05:34 AM.