Need GM Part #
#1
TECH Fanatic
Thread Starter
Join Date: Dec 2002
Location: Bring it........ b*tch
Posts: 1,084
Likes: 0
Received 0 Likes
on
0 Posts
Need GM Part #
Hey guys, anyone know off the top of their head what the part # is for the hex bolt? I know what size it is (12X1.5P), but I can't find one with the right thread pitch anywhere. TIA.
#2
Restricted User
iTrader: (9)
Join Date: Sep 2002
Location: Sierra Vista, AZ
Posts: 7,603
Likes: 0
Received 0 Likes
on
0 Posts
Home Depot doesnt have one? Odd, unless they are out, I got a hex bolt to replace the allen head one pictured above, same length and dia. just different means of fastening. Good luck if you dont find locally.
Charlie
Charlie
#3
Launching!
iTrader: (3)
Join Date: Nov 2004
Location: Fairmont, WV
Posts: 299
Likes: 0
Received 0 Likes
on
0 Posts
LS1 rear coolant bolts (on back of heads) = 11514008
https://ls1tech.com/forums/showpost....6&postcount=15
Hope that helps.
https://ls1tech.com/forums/showpost....6&postcount=15
Hope that helps.
#4
TECH Fanatic
Thread Starter
Join Date: Dec 2002
Location: Bring it........ b*tch
Posts: 1,084
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by CAT3
Home Depot doesnt have one? Odd, unless they are out, I got a hex bolt to replace the allen head one pictured above, same length and dia. just different means of fastening. Good luck if you dont find locally.
Charlie
Charlie
I'll bet if you got one at Home Depot it was the standard 1.75. I guess it may have threaded in, but you may have boogered up the threads in the head doing that.
Last edited by JF WS6; 07-04-2005 at 10:17 PM.
#5
TECH Fanatic
Thread Starter
Join Date: Dec 2002
Location: Bring it........ b*tch
Posts: 1,084
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by DWillTA
LS1 rear coolant bolts (on back of heads) = 11514008
https://ls1tech.com/forums/showpost....6&postcount=15
Hope that helps.
https://ls1tech.com/forums/showpost....6&postcount=15
Hope that helps.
Bolt 11514008 engine C5 Fbody GTO Throttle body to intake manifold bolt. 3 Needed. M6x1.0x30mm
I know that isn't the right size....
#6
TECH Fanatic
Thread Starter
Join Date: Dec 2002
Location: Bring it........ b*tch
Posts: 1,084
Likes: 0
Received 0 Likes
on
0 Posts
I don't care where I get a bolt this size as long as I can get one. If anyone has a spare one around from a junk pair of heads I'll buy it....
Never thought I'd have such a hard time finding 1 stupid bolt.
Never thought I'd have such a hard time finding 1 stupid bolt.