I have found a used ls6 intake for my ls1. It doesn't have the coolant lines or plugs with it. Can I buy these from a sponser, and exactly what do I need? What do they cost? Any help would be greatly appreciated.

 

Give sdpc a call. I think they are pretty cheap.

 

Called them. No answer. Need to know because I'm supposed to pick up the intake this weekend, but if the extras are too much I don't want to spend a lot on the intake.

 

it's less than 30 bucks total for the line and two plugs

 

part numbers are 12570678 for 1 plug, 12581213 for the pipe

 

Cut the lines and JB weld them. I did this and I have not had a single problem.

 

2 coolant lines. They are like $30 for the pair at the dealership. The ls1 coolant line looks like an "I" these are just straight lines w/o the middle line connecting. One goes on the back side and the other goes under your TB.

 

Thanks for the replys. Another memeber on the board sold the intake out from under me, so it's a moot point now. At least I will know what I need when I find another one.