LS1TECH - Camaro and Firebird Forum Discussion
LS1-LS2-LS3-LS6-LS7 PERFORMANCE
Generation III Internal Engine
Pinned Damper

Generation III Internal Engine 1997-2006 LS1 | LS6

Sponsored by:

Pinned Damper

Reply Subscribe

Search this Thread

Old

Jul 30, 2005 | 07:18 AM

#1

Thread Starter

TECH Senior Member

iTrader: (4)

Joined: Jul 2004

Posts: 8,092

Likes: 13

From: Little Rhody

Default

Pinned Damper

Has anyone removed and re-installed their damper after having it pinned? Wondering how easy/difficult it was to re-align the pins since they are precisely drilled without removing the damper to start with.

Old

Jul 30, 2005 | 08:16 AM

#2

TECH Fanatic

iTrader: (361)

Joined: Aug 2004

Posts: 1,704

Likes: 2

From: Lomita CA

Default

Quote:

Originally Posted by vettenuts

Has anyone removed and re-installed their damper after having it pinned? Wondering how easy/difficult it was to re-align the pins since they are precisely drilled without removing the damper to start with.

Good question, I pinned mine from the side vs the front method. So I dont think I will have any issues when it comes time to reinstall. Now if pinned from the end of the snout might be differant issue.

Old

Jul 30, 2005 | 08:23 AM

#3

TECH Fanatic

Joined: Mar 2003

Posts: 1,946

Likes: 1

Default

Quote:

Originally Posted by vettenuts

Has anyone removed and re-installed their damper after having it pinned? Wondering how easy/difficult it was to re-align the pins since they are precisely drilled without removing the damper to start with.

Mine is pinned... and I have pulled it off 4 times for cam swaps, no issues at all. Just take your time and make sure of the alignment when you are putting the pulley back on...

Good Luck,

Reply Subscribe

First
Prev
1 / 1
Next
Last

All times are GMT -5. The time now is 01:24 AM.