Head Gaskets
#3
TECH Regular
Thread Starter
iTrader: (23)
Join Date: Jun 2005
Location: TN
Posts: 437
Likes: 0
Received 0 Likes
on
0 Posts
Thanks are they good for shot of nos I was going to get the felpros but they are.041 and my compression would be about 11.9 to 1. Am i going to have to worry about the graphite gaskets?
#4
LS1TECH Sponsor
iTrader: (1)
gaskets
Get a pair of Cometic gaskets in the thickness you need. They can make them in a variety of thicknesses. Cometics or GM MLS gaskets will not work with the early heads however. Early heads have a "U" shaped cut out on the deck surface. Most had perimeter style valve cover bolts.
Steve
Steve
Originally Posted by 89lx-ls1
Thanks are they good for shot of nos I was going to get the felpros but they are.041 and my compression would be about 11.9 to 1. Am i going to have to worry about the graphite gaskets?
__________________
Steve Demirjian
Race Engine Development
Oceanside, Ca.
760-630-0450
web: www.raceenginedevelopment.com/
e-mail: race-engine-development@***.net
Steve Demirjian
Race Engine Development
Oceanside, Ca.
760-630-0450
web: www.raceenginedevelopment.com/
e-mail: race-engine-development@***.net
#6
LS1TECH Sponsor
iTrader: (1)
Cometic gaskets
You can order Cometic gaskets direct. Toll free number: 1-800-752-9850
You need to tell them the bore size and thickness you need. I can't seem to find my current price sheet.
Steve
You need to tell them the bore size and thickness you need. I can't seem to find my current price sheet.
Steve
Originally Posted by 89lx-ls1
Where do i get the cometic gaskets and how much
__________________
Steve Demirjian
Race Engine Development
Oceanside, Ca.
760-630-0450
web: www.raceenginedevelopment.com/
e-mail: race-engine-development@***.net
Steve Demirjian
Race Engine Development
Oceanside, Ca.
760-630-0450
web: www.raceenginedevelopment.com/
e-mail: race-engine-development@***.net