push rods
Thread Starter
TECH Apprentice
iTrader: (1)
Joined: Aug 2005
Posts: 334
Likes: 0
From: southern cali
push rods well i wasnt sure were to put this thread so if u guys could help me out. .
i was racing last night and when i tryed to threw it into 3 i dropped in into first . . it never really redlined i popped the clutch in b4 it got passed 5k rpms i just wanted to know how bad u guys think i messed up my push rods i was only going about 50 mph thank you . .
i was racing last night and when i tryed to threw it into 3 i dropped in into first . . it never really redlined i popped the clutch in b4 it got passed 5k rpms i just wanted to know how bad u guys think i messed up my push rods i was only going about 50 mph thank you . .
Well the tachs in these cars are SLOW. So you could have been ALOT higher then that. The pushrods are only about 110+shippin so there is no reason to risk it. That and the stockers really arent up to even stock loads. Like hard acceleration and what not. So they prolly have small bends in them which flex on every bump of the cam. It is a easy install. GL
John
John
Thread Starter
TECH Apprentice
iTrader: (1)
Joined: Aug 2005
Posts: 334
Likes: 0
From: southern cali
Originally Posted by 99SS-T
Well the tachs in these cars are SLOW. So you could have been ALOT higher then that. The pushrods are only about 110+shippin so there is no reason to risk it. That and the stockers really arent up to even stock loads. Like hard acceleration and what not. So they prolly have small bends in them which flex on every bump of the cam. It is a easy install. GL
John
John
