Any experience with Lunati cams..

Reply Subscribe

Thread Tools

Search this Thread

Sep 1, 2005 | 03:50 AM

waterbug1999

Thread Starter

10 Second Club

iTrader: (3)

Joined: Jun 2003

Posts: 4,282

Likes: 1

From: Minnesota

Any experience with Lunati cams..

• Advertised Duration IN/EX: 298/301
• Duration @.050 IN/EX: 237/242
• Gross Valve Lift IN/EX: .595"/.595"
• Lobe Sep Angle / Intake Ctr Line: 112/108
• Valve Lash IN/EX: Hyd/Hyd
• RPM Range: 3000-6500

Kind of looks like the MS3 cam minus a little less lift.. Anyone know how this cam performs?

Sep 1, 2005 | 07:39 AM

blacktransam

11 Second Club

iTrader: (13)

Joined: Oct 2003

Posts: 1,414

Likes: 0

From: apoopka, fl

i'm running the 242/242 and i love it..

Sep 1, 2005 | 01:45 PM

ROCNDAV

TECH Junkie

iTrader: (100)

Joined: Mar 2004

Posts: 3,725

Likes: 2

From: Pasadena, CA

Is that the 009 Cam? That's the one I ordered and installed, just haven't got the damn thing together yet

Sep 1, 2005 | 02:05 PM

~JOSHUA

Banned

iTrader: (92)

Joined: Sep 2004

Posts: 7,757

Likes: 2

From: Atlanta

I've got the 236/236 and I ran a friend with an F15. Our cars are both Firehawks with M6. The only difference in mods I've have a pulley and 4.11's and he has 3.73's with no pulley. We ran twice and at the end of fourth I was ahead maybe 1.5 cars. I've got tons of wheelspin off the line while he didn't. I would be behind and then run up hard and start to pass going into 3rd gear.

I wish my cam had a lil more split similar to the F15, but all in all it's very good.

Sep 1, 2005 | 02:33 PM

strokedls1

TECH Fanatic

iTrader: (1)

Joined: Nov 2002

Posts: 1,829

Likes: 0

From: Venice, Ca

I have the single pattern 242 and I like it. It is my second lunati cam.

Sep 1, 2005 | 05:38 PM