slp 402 into a c5 z06
Thread Starter
Teching In
Joined: Jul 2005
Posts: 38
Likes: 0
slp 402 into a c5 z06 will everything from an ls6 engine transfer over to a ls2 block? ive been looking at the aluminum 402 from tbyrne but dont want run into a whole mess of problems down the road. also will be running afr 205 heads fast intake and g5x3 cam. let me know what ya think.
Ive heard that there has to be a modification done to the knock sensors. Not 100% sure but Id like to know as well since Im leaning this route soon.
Ive heard using the 205cc would make it great for the street, but would there be any advantage to go with the 225cc on a 402? Will it drop my low end a bit?
Dixit
Ive heard using the 205cc would make it great for the street, but would there be any advantage to go with the 225cc on a 402? Will it drop my low end a bit?
Dixit
TECH Senior Member
iTrader: (10)
Joined: Nov 2001
Posts: 8,766
Likes: 0
From: Gainesville, Denton TX
check the ls2/ls7 section, tons of threads reguarding knock sensors etc.
the g5x3 will be a completely baby cam in a 402. seriously consider something in the mid - high 240s on the intake side, and close to or over 250 on the exhaust.
205s will be good, but 225s will be better. Larger cubes = need more air = needs good heads.
the g5x3 will be a completely baby cam in a 402. seriously consider something in the mid - high 240s on the intake side, and close to or over 250 on the exhaust.
205s will be good, but 225s will be better. Larger cubes = need more air = needs good heads.
