ASA cam question
ASA cam question I am thinking pretty seriously about getting the ASA hotcam. I know it's on a 110 LSA, and this is a 98 A4 car. Im going to have it tuned at Speed Inc. after the install. My question is what drivability concerns am I going to have. Im gonna have a conertor in the car, and a set of 3.73 gears,and there is no A/C. I love the sound of a really choppy cam, and I like the fact of the lower lift being a little easier on springs. I was just wondering if with the tune, will I still have to worry about the car dying on me at lights, or when it is just sitting somewhere idleing? Also I was planning on getting the Scoggin Dickey valve springs for it with the Titanium retainers. Are these a good spring for it, or should I just get the LS6 springs?
Thanks
Bill
Thanks
Bill
TECH Regular
Joined: Nov 2001
Posts: 484
Likes: 0
From: Houston
Re: ASA cam question Let put it this way, my 248/254 568/571 cam on a 110Ls idles better than the TR224 cam I had. It does idle a lot more choppy but It rarely dies on me and I can drive it on traffic with out a hitch. I have STOCK tuning too. I have a auto trans and a good stall.
The only bad thing it after idleing for about 20 minutes it somtimes loadsup a little. Just a little rev will clean out the cylinders just fine though.
You will not have much of a problem at all.
Ken
The only bad thing it after idleing for about 20 minutes it somtimes loadsup a little. Just a little rev will clean out the cylinders just fine though.
You will not have much of a problem at all.
Ken
Re: ASA cam question Had another question on the ASA cam. For the people who are running or have run this cam, Did you use stock length push rods? If not, what size does it call for?
Re: ASA cam question </font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif">Originally posted by Ken:
<strong> Let put it this way, my 248/254 568/571 cam on a 110Ls idles better than the TR224 cam I had. It does idle a lot more choppy but It rarely dies on me and I can drive it on traffic with out a hitch. I have STOCK tuning too. I have a auto trans and a good stall.
The only bad thing it after idleing for about 20 minutes it somtimes loadsup a little. Just a little rev will clean out the cylinders just fine though.
You will not have much of a problem at all.
Ken </strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">ok so does this not make sense to anyone else? hwo in the world does it idle on stock tuning? the TR224 on its fast ramps is one of the smoothest cams i have ever heard. in fact with a good muffler it sounds nearly stock. <img border="0" title="" alt="[Confused]" src="images/icons/confused.gif" />
<strong> Let put it this way, my 248/254 568/571 cam on a 110Ls idles better than the TR224 cam I had. It does idle a lot more choppy but It rarely dies on me and I can drive it on traffic with out a hitch. I have STOCK tuning too. I have a auto trans and a good stall.
The only bad thing it after idleing for about 20 minutes it somtimes loadsup a little. Just a little rev will clean out the cylinders just fine though.
You will not have much of a problem at all.
Ken </strong></font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">ok so does this not make sense to anyone else? hwo in the world does it idle on stock tuning? the TR224 on its fast ramps is one of the smoothest cams i have ever heard. in fact with a good muffler it sounds nearly stock. <img border="0" title="" alt="[Confused]" src="images/icons/confused.gif" />
TECH Apprentice
Joined: Aug 2002
Posts: 331
Likes: 0
From: Gambrills, MD
Re: ASA cam question Beg to differ --- I have heard the 224 XE-R cam in two different LS1's, & I could hear the "cam" a mile away in a thunderstorm. Both cars surged badly at idle, & smelled like an oil refinery. Maybe they smooth out a lot after tuning --- sure hope so.
