yet another recommend me a cam thread...
Thread Starter
Launching!
Joined: May 2005
Posts: 210
Likes: 0
yet another recommend me a cam thread... hi guys i'm building a nice heads cam motor using the new dart 225cc heads and have a few cam-related questions. i'm shooting for 11:1 compression.
i need a cam that:
1. makes good HP up to 6500 rpm. i'm not dyno racing here so it's irrelevant what the motor makes at 7000 rpm.
2. will not require piston changes/flycutting to run 'x' thickness cometic head gasket to acheive 11:1 comp.
3. will handle street duty, not kill valvesprings and take some open-road racing (endurance)
any ideas?
i need a cam that:
1. makes good HP up to 6500 rpm. i'm not dyno racing here so it's irrelevant what the motor makes at 7000 rpm.
2. will not require piston changes/flycutting to run 'x' thickness cometic head gasket to acheive 11:1 comp.
3. will handle street duty, not kill valvesprings and take some open-road racing (endurance)
any ideas?
Last edited by stevewix; Sep 26, 2005 at 04:00 PM.
http://www.vincihighperformance.com/...%20LS1%202.htm
here pick one. better yet, call them up and ask what mike edstrom is using in his corvette he uses for autocrossing that he's winning his class with. there's a write up about mike edstrom in corvette enthusiast.
here pick one. better yet, call them up and ask what mike edstrom is using in his corvette he uses for autocrossing that he's winning his class with. there's a write up about mike edstrom in corvette enthusiast.
