Please Help With Stock 01 Cam Specs
Thread Starter
11 Second Club
iTrader: (12)
Joined: May 2005
Posts: 1,142
Likes: 0
From: Cedar Rapids, IA
Please Help With Stock 01 Cam Specs I am trying to input the LS1 into dyno2003 software,a dn cant seem to find everythign i need. Here is what I need to get it done, all for the stock 2001 camshaft:
Seat to Seat duration of intake and exhaust
0.05 inch duration of intake and exhaust
Intake and Exhaust centerlines
Intake and Exhaust max lift
Cam lobe-center angle
Ramp Rate
If someone coudl please get me these, i woudl really appreciate it, i have been trying to search for this for hours! Also, what shoudl I put in for th fuel, since we use injectors, and all it has is cfm ratings. Let me know, thanks!
Seat to Seat duration of intake and exhaust
0.05 inch duration of intake and exhaust
Intake and Exhaust centerlines
Intake and Exhaust max lift
Cam lobe-center angle
Ramp Rate
If someone coudl please get me these, i woudl really appreciate it, i have been trying to search for this for hours! Also, what shoudl I put in for th fuel, since we use injectors, and all it has is cfm ratings. Let me know, thanks!
Last edited by 01FbTaWs6; Oct 16, 2005 at 09:00 PM.
