Head Install Questions
10-18-2005, 08:59 AM
#1
TECH Fanatic
Thread Starter
iTrader: (3)
Join Date: Jun 2003
Location: El Paso
Posts: 1,139
Likes: 0
Received 0 Likes
on
0 Posts
Head Install Questions I am about to order some heads from TEA and have a couple of questions. First of all they are LS6 heads with 2.05 intake valves, stock exhaust valves, and will be milled to 61 cc's. The cam i currently have on my Z06 is a F13 on a 112 + 2 and will be running a .045 gasket. My questions are:
1. how much will i have to flycut on the intake and exhaust
2. what length pushrods do I run
3. what will my static and dynamic compression be after flycutting my pistons.
4. will it run ok on 91 octace, granted i am at 4100' above sea level
1. how much will i have to flycut on the intake and exhaust
2. what length pushrods do I run
3. what will my static and dynamic compression be after flycutting my pistons.
4. will it run ok on 91 octace, granted i am at 4100' above sea level
