What do you think about this setup??
#1
11 Second Club
Thread Starter
Join Date: Jan 2005
Location: hesperia,ca
Posts: 178
Likes: 0
Received 0 Likes
on
0 Posts
What do you think about this setup??
Block: 383 stroker-blueprinted & balanced
Heads: AFR-205's
Cam: don't know yet; what should i get??
QTP long tubes
3in X-pipe dumped before the axle no cats
FAST 90mm intake/90mm throttle body
Z06 maf
electric water pump
crank pulley
i just put this together real quick so there's stuff i didn't mention.... but what else should i get?? i need help on picking a cam! anyone with a very similar setup?? the car is going to be a trans am WS6 with an a4 setup for street/drag. what kind of #'s should i expect??
Thanks in advance guys! Kyle
Heads: AFR-205's
Cam: don't know yet; what should i get??
QTP long tubes
3in X-pipe dumped before the axle no cats
FAST 90mm intake/90mm throttle body
Z06 maf
electric water pump
crank pulley
i just put this together real quick so there's stuff i didn't mention.... but what else should i get?? i need help on picking a cam! anyone with a very similar setup?? the car is going to be a trans am WS6 with an a4 setup for street/drag. what kind of #'s should i expect??
Thanks in advance guys! Kyle