500 Cid Ls1
Thread Starter
TECH Veteran
iTrader: (12)
Joined: Dec 2004
Posts: 4,354
Likes: 0
From: Rockville, MD
500 Cid Ls1 when are we gonna see one, how is it gonna be setup, and is it really possible? i mean weve seen soo much crazy stuff in the ls1 world this would seem to be the icing on the cake.
500 inches You won't see one without a tall deck aftermarket block. The block will also need a raised cam and kicked out walls to clear the stroke.
With a 4.200" bore, you will need to swing a 4.500" arm to get 499".
Steve
With a 4.200" bore, you will need to swing a 4.500" arm to get 499".
Steve
Originally Posted by 8KickassRS9
when are we gonna see one, how is it gonna be setup, and is it really possible? i mean weve seen soo much crazy stuff in the ls1 world this would seem to be the icing on the cake.
__________________
Steve Demirjian
Race Engine Development
Oceanside, Ca.
760-630-0450
web: www.raceenginedevelopment.com/
e-mail: race-engine-development@***.net
Steve Demirjian
Race Engine Development
Oceanside, Ca.
760-630-0450
web: www.raceenginedevelopment.com/
e-mail: race-engine-development@***.net
TECH Enthusiast
Joined: May 2005
Posts: 555
Likes: 0
From: Blairsville, GA
I'd venture to say that the 427CI LS7 engine is punched and stroked just about to the max already. I was real impressed with that, to be honest, even after knowing that people are making 454CI small-blocks out of Gen II motors. But who knows??? GM's CEO/president/marketing VP/guy who says what happens/(insert title here)may be trolling this site waiting to see what we V8 fans are looking for in the aftermarket.
TECH Addict
Joined: Aug 2004
Posts: 2,866
Likes: 4
well World products are releasing a new block and heads (with 6 bolts per cylinder!!!) and i think thye can strech that to 454! and thats on an Ally block!!
have a look in the FI section on this board for infomation.
thanks Chris.
have a look in the FI section on this board for infomation.
thanks Chris.
