Edelbrock cams
11-06-2005, 05:33 PM
#1
Edelbrock cams Does anyone run or know anyone that runs one of the Edelbrock LS1 cams?
I see 2 of them. The larger one is interesting. Specs are as below.
220/224 - .510/.510 111
230/237 - .540/.540 110
These cams are only 299 from Summit.
I see 2 of them. The larger one is interesting. Specs are as below.
220/224 - .510/.510 111
230/237 - .540/.540 110
These cams are only 299 from Summit.
11-06-2005, 09:16 PM
#3
Launching!
iTrader: (4)
Join Date: Aug 2003
Location: Lagrange Ga/Mayport Fl
Posts: 222
Likes: 0
Received 0 Likes
on
0 Posts
Their website says more aggressive lobes but don't exactly say what. Looks like it would work better with 1.8 rockers but then by the time you buy those you may as well bought a cam with more lift to start with. Just a little bigger than a GM ASA cam.