MS3 with thinner HG
Thread Starter
11 Second Club
iTrader: (6)
Joined: Feb 2003
Posts: 463
Likes: 0
From: Oklahoma City, OK
MS3 with thinner HG I have to pull my heads again and replace my lifters. I was going to use the Fel Pro 9284PT HG's but I was just reading that the CH of the stock graphite ones is .052 and the 9284PT is .046 or so. Since the cam is only supposed to be used with stock valves or else they will hit, would the Fel Pros be too thin and have PTV clearance issues?
Thanks
Thanks
