Generation III Internal Engine 1997-2006 LS1 | LS6
Sponsored by:
Sponsored by:

Track Times with MS3

Thread Tools
 
Search this Thread
 
Old Jan 29, 2006 | 06:14 PM
  #1  
walker94z28's Avatar
Thread Starter
10 Second Club
 
Joined: Jul 2004
Posts: 366
Likes: 0
From: Small Town, Tn
Default Track Times with MS3

Well guys, I finally made it out to the local 1/8 mile track to test my car with the MS3. I had a good time overall, although I found something out verry early. I NEED A BIGGER CONVERTER. On the motor my best pass was 1.680 60', 7.456 at 94.71mph. The car felt like it was boging out of the hole but after it hit 5500 or so HOLD ON. Then I made a few nitrous passes and man alive. Best time was 1.473 60', 6.636 at 104.40 mph. Overall I am really impresed and I am sending my converter off to get loosened up to a 4500 next week......
Reply
Old Jan 29, 2006 | 06:42 PM
  #2  
sh33p4u's Avatar
Staging Lane
iTrader: (5)
 
Joined: Jan 2005
Posts: 53
Likes: 0
Default

do you have bigger injectors/fuel pump for that dry shot ontop of that cam?
Reply
Old Jan 29, 2006 | 06:46 PM
  #3  
1QuickT-A's Avatar
10 Second Club
iTrader: (12)
 
Joined: Dec 2004
Posts: 2,034
Likes: 0
From: Birmingham, Alabama
Default

The bigger converter should definately pick it up a few tenths and get you in the MS3s power band. Nice numbers cam only!
Reply
Old Jan 29, 2006 | 06:51 PM
  #4  
walker94z28's Avatar
Thread Starter
10 Second Club
 
Joined: Jul 2004
Posts: 366
Likes: 0
From: Small Town, Tn
Default

stock injectors and stock fuel pump. all suspension is stock other than torque arm
Reply
Old Jan 29, 2006 | 08:35 PM
  #5  
REDWS6ROCKET's Avatar
TECH Regular
iTrader: (4)
 
Joined: Jul 2004
Posts: 471
Likes: 0
From: Blue Springs, MO
Default

i can't wait to get my set up done. ms3 and yank pt4200
Reply
Old Jan 29, 2006 | 08:50 PM
  #6  
just-a-z's Avatar
TECH Enthusiast
iTrader: (25)
 
Joined: Dec 2004
Posts: 592
Likes: 0
From: Houston, TX
Default

same here, but PT4400!
Reply




All times are GMT -5. The time now is 08:25 PM.