maverick18

iTrader: (5)

not sure if this belongs here or the gear section. I know with some bigger cams they say a 4.10 ratio is required or a bigger TC for auto cars. would my cam fall under this catagory? Would i pick up a lot down low with a 4.10? The cam is a MTI X1 230/227 .591/.571 114 LSA
Thanks, Dane

prostock_bigblock

iTrader: (11)

3.73 well work well with your cam but 4.10 would gain u better results all around . Just go 4.10 their fine with m6 and most recommanded.

CRL 01 SS

iTrader: (4)

Go with 4.10s since you have an M6. It isn't a "must" that you install steeper gears with that cam, but it will drive and perform better.