What are you guys torking your ARP main studs with molly lub. I was told 55lbs on the inner and 65lbs outer and 22lbs on the outer cross bolts does this sould right

 

I have written down, 60lb-ft on the inner, 50lb-ft on the outers, and 18lb-ft on the sides, all with moly lube.

 

O.K. thanks

 

I torqued mine down to 70lbs large studs...22lb small....

 

I used 65ft/lbs on the large and 22ft/lbs on the small

 

i torqued my to 70lb big 22 small as well

 

is every body useing the molly lub to tork ?

 

60 Inner and outer WITH Moly, very important to have the moly or the torque readings will be very different. 18 on the sides is the GM spec with the GM bolts.

 

What do mean by large and small? I assume you mean 70lb-ft on the inner and outer studs, and 22lb-ft on the cross-bolts?

 

Damn, every body has a different tork, I'm confused

 

i used arp head STUDS it says this torque on the box....
call the company that supplied the studs.

 

We are talking about MAIN studs not head studs.

 

Yes, the LS1 ARP 12 point Main Studs

 

Disregard my response I was referring to HEAD studs....

 

I guess I'm the only one who gave torque specs for the main studs and not head studs. Anyways, 60 on the inner, 50 on the outer, and 18 on the sides is what I have written down. The local engine builder used the same specs when measuring my bearing clearances.

 

inner - 60 ft lbs
outer - 50 ft lbs
side - 19 ft lbs
windage tray - 28 ft lbs

all w/ arp moly lube. thats right of the ARP instructions i have sitting right in front of me.

 

I was close!

 

Thanks