im not sure what advance this cam has ground into it. The card does not say. However the instructions say that most comp cams are ground with 4 degrees advance. the cam is on a 112 ls1. The cam card has a disclaimer that reads something like: *specs if installed on a 110 ICL. Now 112 - 110 = +2. Its the if part that throws me. does that mean that theres +2 ground in or is it the usual +4 since it dosnt directly say...

cam in question is a 232/234 .595/.598 112

Thanks

 

Look at the intake lobe if the centerline is 108 then it has 4 degrees advance built in.

 

it dosnt state the ICL on the card.

 

I have had this problem before. Just call CompCams and give them the serial... they will have all the details on file...

 

Cool, called them up. The cam was indeed on a 110 ICL. +2 advance it is.