Lifter Install Question
#1
Teching In
Thread Starter
Join Date: Mar 2005
Location: Sherman CT
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
Lifter Install Question
I am in the middle of my H/C swap. I have my ARP Studs in and everything is clean and ready to begin putting the thing back together.
I noticed on the lifters there is a hole on one of the sides. Fitting the lifters into the retainer this hole can either be towards the top of the motor or toward the bottom. Taking it apart there did not seem to be any pattern, did I miss something or it doesn’t matter which way they go in?
I noticed on the lifters there is a hole on one of the sides. Fitting the lifters into the retainer this hole can either be towards the top of the motor or toward the bottom. Taking it apart there did not seem to be any pattern, did I miss something or it doesn’t matter which way they go in?